top of page
ASTON MARTIN V8 VANTAGE - ANTI CONDENSATION KIT

For this project we needed to make a kit which solved the problem of condensation in the rear tail lights. 

Because the rear lights are LED's controlled by a circuit board, having condensation in there isn't ideal. 

Kit Requirements:

1. Permenantly fix the condensation 
2. Easily Installed
3. Be easily servicable

 

Internals of the LED Taillights.

This issues appear when the condensation gets onto the circuit board and shorts them out, we did have a little corrosion in one of the terminals but that cleared up with a brush and a little bit od WD40. 

We started by taking scans of the internals of the tail lights so we had someting to work with. 

Using the internal parts of the taillight we worked out how much space we had to work with and created this container which sits behind snugly. (it does have a lid, it was left off for the pictures)

The idea is that the container will be filled with rejuvenating silica gel so you dont have to keep buying new product, rather empty and rejuvenate them in the microwave.

Whilst being able to be re-filled, we needed to make it so that it could be done without having to pull the lights apart again! 

Using the scan we were able to create a template so we can drill the light housing in exactly the correct position 

An example of how you will be able to re-fill the container without having to take the lights apart. 

When the funnel is not in, its secured with a rubber grommet. 

 

We have been testing this kit in our own car for over a year. 

To test it as thoroughly as possible we installed one of our kits into the passenger side, and left the drivers light sealed in the traditional way with tigerseal. 

We had no condensation for about 2/3 months and then it started to appear. But only in the drivers light! the passenger light stayed condensation free!

 




November 2026
 




March 2026
 




April 2026
 




May 2026
 




June 2026
 

June 2026
 




October 2026
 

Throughout the year of testing the passenger light has never had any condensation appear and it's never had the desiccant replaced.

If you have condensation in your rear lights and you need to seperate them anyway to fix the condensation, that would be a perfect time to install our kit. 

The results speak for themeselves. 

You can buy them directly from our website 
https://www.type116motorsport.co.uk/product-page/v8v-rear-light-evaporation-kit

 

CALL US

Tel: +44 07842611839

EMAIL US
OPENING HOURS

Mon - Fri: 8am - 10pm

OVER 17 YEARS EXPERIENCE

From way back in 2007 to now, we have lots of experience with the Lotus and VX220 platform. From fault finding to race prepping we have done it all! 

OUR SERVICES

- Mechanics

- Pre MOT Car Checks

- Scheduled Servicing

- Supercharger Installations

- Exhaust Fitting

- Plus much more

VISIT US

Rawdon, Leeds

United Kingdom

  • Facebook Social Icon
  • YouTube Social  Icon
  • Instagram

© 2019 - 2021 Type 116 Motorsport

bottom of page